Obviously, the groove has to be totally "disappeared" before you insert the rivets! Once the holes are fully drilled, you can sand away the groove. Softer tape allows the scribing tool to wander.) Then it's just a matter of stepping the divider down the groove and making a pilot hole at each step. (Dymo Tape works well as a cutting guide. If I were to do it again, I'd use a scribing tool to cut a fairly deep groove - not merely a scratch! - along the entire planned rivet line. Aaargh!Īs it turns out, any deviation from the line looks awful. But then I drilled them (#74) and inserted rivets in the holes. The pinholes even looked like they were lined up pretty straight. Well, I thought I was punching them on the line. I scratched a line in the primer, then, wearing an Opti-visor, I used the dividers to punch pilot holes along the line. ![]() The tricky part is not so much spacing the holes - that's easy with the dividers - but in drilling the holes in a straight line. To look right, a straight line of rivets has to be very, very straight. They're expensive and harder to handle, but they would look a lot more realistic, especially since there are so many on your Bug.įor spacing the rivet holes and punching starters, a good pair of drafting dividers with pin-points on both legs is indispensable! Dividers would also be very useful for spacing those louvers. The Tichy rivets themselves are fine, but I'm not very happy about the size I chose. They are cheap - only $2.50 for 200 rivets. They come on a sprue and are intended for HO train applications. I ended up using styrene Tichy Train Group rivets with. ![]() Don't know how you would hide the film, though. There are even decals that are supposed to look like rivets. There are some amazingly expensive metal ones out there. Here's everything I found out hope you find it useful: I've just finished riveting up my Finescale 1/24 BRM P57, and learned a lot in the process. The only solution I could find was to cannibalize a diecast. ![]() Hope you'll do a WIP.ĭo you have a source for those tall skinny wire wheels? Recently, I spent quite a bit of time searching for some early wires with no success. Only Ettore's mama could love the "styling" of his tanks, but they certainly had character. Terrific subject! My favorite era, scale and type of car.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |